Installation Guide

30” ELECTRIC FRONT CONTROL FREESTANDING INSTALLATION INSTRUCTIONS

Filler Trim Attachment Instructions:

1. Remove the 7 screws on the vent trim on the back.

Fig. 19 - Range with ller trim installed.

2. Place the ller trim over the back by lining up the 7

screw holes of the ller trim with the vent trim and

tighten screws.

3. When ller trim is secured it will be ush with the top of

the range.

7. Install ller trim kit

Note: Installation of the ller trim kit is not required.

Disconnect electrical power to range before

beginning installation. Before servicing any part of the

appliance, make sure the appliance is o󰀨 and the surfaces

are cool. Attempting to service the appliance while hot may

cause burns or other injury.

Fig. 16

Fig. 17

Fig. 18