Owner Manual

24
Alarms
Power Failure
In the event of a power failure, the power fail
alert will be illuminated. Press “mute alarm”
to acknowledge the alarm. Other modes may
be turned off until the alarm is acknowledged.
While a power failure alert is displayed on the
control panel, the unit will continue normal
operation. The power fail alert on the control
panel will be removed once the user acknowl-
edges the power fail condition by pressing any
key on the control panel. The high temp alarm
may also be illuminated until a safe operating
range temperature has been reached.
Freezer Temp
If the freezer temperature reaches 26°F or
greater, the alarm will sound and the tem-
perature will ash and the dispenser control
will display “HIGH TEMP DETECTED”. You can
disable the alarm by pressing “mute alarm” but
the “HIGH TEMP DETECTED” indicator will illu-
minate until the temperature goes below 26°F.
Fresh Food Temp
If the fresh food temperature reaches 55°F or
greater, the alarm will sound and the tem-
perature will ash and the dispenser control
will display “HIGH TEMP DETECTED”. You can
disable the alarm by pressing “mute alarm” but
the “HIGH TEMP DETECTED” indicator will illu-
minate until the temperature goes below 55°F.
Door Ajar
If the freezer or fresh food doors have been
left open for ve minutes or more, an alarm
will sound and the door ajar indicator will il-
luminate on the display. Press “mute alarm” to
reset any system alarms.
Flapper
When “CUBES” or “CRUSHED” is selected, if
the apper (or ice chute door) is being held
open by a jammed ice cube, an alarm will
sound for two minutes and the current selec-
tion will blink on the dispenser control. The
alarm will reset after two minutes or when the
ice cube is removed.
Dispenser Controls
(options may vary)
WATER Press the “WATER” key to
select water.
CUBES Press the “CUBES” key to
select cubed ice.
CRUSHED Press the “CRUSHED” key to
select crushed ice.
light Toggles dispenser light on
and off.
CONTROLS - FRIGIDAIRE PROFESSIONAL