Use & Care Guide

6
OPERATING INSTRUCTIONS
Status Indicator Lights
Status Window
The STATUS window, available on some
models, indicates the following activity:
1H-24H............. Number of delay start
hours. The last hour
will count down in
minutes.
Cd..................... Close dishwasher
door. The status
indicator lights will
also fl ash to indicate
current cycle status.
MINUTES.......... Number of minutes
left in cycle (1-199).
PF.................... Appears in window
when dishwasher is
fi rst connected to Power
or when power is
restored following an
interruption. To clear,
select START/CANCEL
or close the door.
In the unlikely event that the dishwasher
malfunctions, displays the error code
“Uo”, or gives poor performance you can
call the Frigidaire Customer Care Center
at 1-800-944-9044. They will be able
to provide assistance in troubleshooting
the problem and/or locating an
authorized service technician, if needed.
If it is desired to have the console lights
remain off while running, perform the following
operation: Prior to starting a cycle, press
and hold POWER PLUS and RINSE ONLY
simultaneously for approximately 8 seconds
until the corresponding lights fl ash. This
will turn the console lights off during cycle
operation. Simply repeat this operation to
revert back to the previous setting.
Console Lights
Overlay
The console lights provide information about
the cycle selection and current status. During
operation, while the door is closed, these
lights will remain on. At the completion of
the cycle, the clean light will come on. The
sanitization light will also come on if that
option was selected and sanitization was
achieved during the wash cycle.