Specification Guide
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
INSTALLATION SPECIFICATIONS
•
Product Shipping Weight (approx.) – 293 Lbs.
•
Voltage Rating – 120V / 60 Hz
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
(For use on adequately wired 120V, dedicated circuit having 2-wire service
with a separate ground wire. Appliance must be grounded for safe operation.)
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing codes.
•
Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance that
extends beyond front edge of unit, 20" minimum clearance recommended
to allow for optimum 120° to 180° door swing, providing complete
drawer / crisper access and removal. (Absolute 4-1/2" minimum clearance will
ONLY allow for 90° door swing which will provide drawer / crisper access with
restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or close
proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100 pounds
per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line with
length equal to distance from rear of unit to household water supply line
plus 7 additional feet. Optional Water Supply Installation Kits available.
•
Adjustable front rollers to assist with door alignment.
“BUILT-IN LOOK” SPECIFICATIONS
•
Minimum opening of 70-1/4" H x 36" W x 28-7/8" D required to allow for ease
of installation, proper air circulation, and plumbing / electrical connections.
•
Remove all wall / floor molding prior to installation.
FGSS2635T 07/17
© 2017 Electrolux Home Products, Inc.
Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca
Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca.
FGSS2635T D / F / P / E
SIDE-BY-SIDE REFRIGERATOR
25.5 CU. FT. STANDARD-DEPTH
26 Cu. Ft. Standard-Depth Refrigerator_Hidden Hinges
Gallery
33
3
/8"
5"
28
3
/4"
69
7
/8"
with
3
/8"
rollers
68
5
/8"
with
3
/8"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
35
7
/8"
Allow 50"
min.
(with doors 90°
open)
36"
Doors
35
7
/8"
Cabinet
Standard
Refrigerator Depth
vs. Counter Depth
23
7
/8"
Counter Depth
28
3
/4"
Standard Depth
“Built-In Look”
Cutout Dimensions
(A) 70
1
/4" (B) 36" (C) 28
7
/8"
Top View
24"
Cabinet
28
7
/8" Side Panels,
1
/2" min. width
25"
Countertop
Allow 1" min. clearance at rear
for proper air circulation and
water
/
electrical connections
Recessed
water line
Recessed
electrical outlet
B
C
A