Owner's Guide

17
CONTROLS - NON-DISPENSER MODELS
Setting cooling temperatures
Press the + or − indicator to adjust the temperature to the desired
setting.
The temperature setting will begin to blink with the rst touch. The
display will time out after 10 seconds and return to the basic display.
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
Power
On Off
Press and hold for three seconds to turn off the
cooling system to clean the refrigerator. The digital
displays will read OFF.
Default
Settings
Resets all refrigerator settings such as temp, temp
display and tones to their factory default settings.
Quick
Freeze
Activates a faster rate for freezing food.
Quick Ice Temporarily increases cooling for freezer to increase
the production of ice
Air Filter Filter condition status is always displayed when
door is open. Press and hold for three seconds to
reset after lter change.
Water
Filter
Press and hold for three seconds to reset after lter
change.
Alert
Reset
Tones emitted by each key press can be turned off
based on user preference. The sounds are muted
when the red indicator is lit. Warning signals will
stay active.
F/C Touch to toggle display from Fahrenheit to Celsius.
User Interface In-Door Controls (options may vary)
IMPORTANT
Pressing the system on/off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.

NOTE
The recommended settings for a product installed in a kitchen is
37˚F for the fresh food compartment and 0˚F for the freezer.