Owner Manual
Table Of Contents
- Important Safety Instructions
- Features At A Glance - Baseline Model
- Features At A Glance - Gallery Model
- Features At A Glance - Pro Model
- Installation
- Door Removal Instructions
- Installing Door Handles
- Connecting the Water Supply
- Controls - Frigidaire & Frigidaire Gallery Dispenser
- Controls - Non-Dispenser Models
- Controls - Frigidaire Professional
- Automatic Ice & Water Dispenser
- Automatic Ice Maker - Freezer (select models)
- Storage Features
- Storing Food and Saving Energy
- Normal Operating Sounds and Sights
- Changing the Filter
- Care & Cleaning
- Before You Call
- Major Appliance Warranty
9
Raise
To make nal door height adjustments:
Flipper
Mullion
Screw
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
2 Adjust ipper mullion height. For proper
connection with the ipper mullion guide,
there should be a separation about the
thickness of a coin (0.060 inches, or
1.5 mm) between the guide and ipper
mullion.
3 Re-tighten screw.
To adjust the ipper mullion:
1 Loosen the screw located on the ipper
mullion hinge.
Flipper
Mullion
Mullion
Guide
Thickness
of a Coin
Adjusting Flipper Mullion Height
INSTALLATION
1. Open freezer drawer to make lower hinge
visible.
2. Insert 6mm Allen wrench into the shaft of
the lower hinge.
3. Adjust the height by turning clockwise or
counterclockwise. Turning clockwise will
lower the door. Turning counterclockwise
will raise the door. Default setting is to
the lowest height when you receive your
appliance.
Door
Door