User Manual

28
BEFORE YOU CALL
Visit our web site at
www.frigidaire.com
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
CONCERN CAUSE SOLUTION
AUTOMATIC ICE MAKER
Ice maker is
not making any
ice.
• Ice maker is turned off.
• Refrigerator is not
connected to water line
or water valve is not
open.
• The water supply line is
kinked.
• Thewaterlterisnot
seated properly.
• Thewaterltermaybe
clogged with foreign
material.
• Turn on ice maker. Press and hold the “ON-
OFF” button for three seconds until the
indicator light is on.
• Connect the unit to the household water
supply and ensure the water valve is open.
• Ensure that the supply line does not kink
when the refrigerator is pushed into place
against the wall.
• Removeandre-installthewaterlter.
Remove by rotating it counter-clockwise (to
the left) 90 degrees to release it. Re-install
byslidingitintothelterhousingasfaras
it will go with the grip end horizontal. Push
lightlyinwardonthelterwhilerotatingit
clockwise(totheright).Thelterwillthen
pull itself inward as it is rotated. Rotate the
lter90degreesuntilitstopsandthegrip
end is vertical. You may be able to feel a
verylightclickasthelterlocksintoplace.
• If water dispenses slowly or not at all, or
ifthelterissixmonthsoldorolder,it
should be replaced.
Ice maker is
not making
enough ice.
• Ice maker is producing
less ice than you expect.
• Thewaterltermaybe
clogged with foreign
material.
• The water supply line is
kinked.
• Saddle valve on cold
water pipe is clogged
or restricted by foreign
material.
• Heavytrafc,opening
or closing of the doors
excessively.
• Freezer control is set too
warm.
• The ice maker produces approximately 2.5
to 3 pounds every 24 hours depending on
usage conditions.
• If water dispenses slower than normal,
orifthelterissixmonthsoldorolder,it
should be replaced.
• Ensure that the supply line does not kink
when the refrigerator is pushed into place
against the wall.
• Turn off household water line valve.
Remove valve. Ensure that valve is not
a self-piercing saddle valve. Clean valve.
Replace valve if necessary.
• Press Quick Freeze to temporarily increase
ice production rate. (Does not apply to
Frigidaire Professional.)
• Set freezer control to colder setting to
improve performance of the ice maker.
Allow 24 hours for temperature to stabilize.