Complete Owner's Guide

25
CARE AND CLEANING
Protecting your investment
Keeping your appliance clean maintains
appearance and prevents odor build-up.
Wipe up any spills immediately and clean
the freezer and refrigerator compart-
ments at least twice a year. When clean-
ing, take the following precautions:
• Never use CHLORIDE or cleaners
with bleach to clean stainless steel.
• Do not wash any removable parts in
a dishwasher.
• Always unplug the electrical power cord
from the wall outlet before cleaning.
• Remove adhesive labels by hand. Do
not use razor blades or other sharp
instruments which can scratch the
appliance surface.
• Do not remove the serial plate.
Do not use abrasive cleaners such as win-
dow sprays, scouring cleansers, brushes,
flammable fluids, cleaning waxes, concen-
trated detergents, bleaches or cleansers
containing petroleum products on plastic
parts, interior doors, gaskets or cabinet
liners. Do not use paper towels, metallic
scouring pads, or other abrasive cleaning
materials or strong alkaline solutions.
CAUTION
• Pull the unit straight out to move
it. Shifting it from side to side may
damage flooring. Be careful not
to move the appliance beyond the
plumbing connections.
• Damp objects stick to cold metal
surfaces. Do not touch refrigerated
surfaces with wet or damp hands.
• Sudden temperature changes can
cause glass breakage.

NOTE
If you set your temperature controls
to turn o cooling, power to lights and
other electrical components will contin-
ue until you unplug the power cord from
the wall outlet.
IMPORTANT
If you store or move your unit in freez-
ing temperatures, be sure to completely
drain the water supply system. Failure to
do so could result in water leaks when
you put the unit back into service. Con-
tact a service representative to perform
this operation.
Replacing the LED Light Bulb
1. Unplug the refrigerator.
2. Wearing gloves, slide the clear light
cover along the top of the unit to-
ward the front of the unit.
3. Replace the old LED bulb with a
bulb no greater than 5 watts.
Caution: Wear gloves when replac-
ing the LED bulb to avoid getting
cut. Use the same wattage when
replacing the LED bulb.
4. Replace the light cover
5. Plug in the refrigerator.