Use and Care Manual

18
Temperature
Adjustment
Adjust the temperature gradually: adjust in small increments, allow-
ing the temperature to stabilize.
• For colder temperatures, press the Temp button to change the
temperature setting toward Coldest.
• For warmer temperatures, press the Temp button to change the
temperature setting toward Cold.
Adjusting the refrigerator control will change temperature in both
compartments. The freezer control can be left at the factory preset
(*Recommended) or adjusted as desired.
To maintain temperatures, a fan circulates air in the refrigerator and
freezer compartments. For good circulation, do not block cold air
vents with food items.
Air Filter
Status*
The display shows the current status of the air filter (Good, Order, or
Replace). To reset the filter status to Good, press and hold Air Filter
for 3 seconds.
Water Filter
Status
The displays shows the current status of the water filter (Good,
Order, or Replace). To reset the filter status to Good, press and hold
Water Filter for 3 seconds.
*Only on some models
In-Door Control Display Mode Views
Your display is equipped with a sleep and inactive mode to prevent accidental changes
to the unit settings during opening and closing of the doors. When both doors are
closed, the display will be in sleep mode. When either door is first opened, the display
will be in inactive mode where all the current settings are visible but dimmed.
Pressing any button on the display will activate the display and a tone will be played.
All settings will then be fully lit. Touch the display again to change any setting.
If there is no button pressed for 10 seconds while any door is open, the display will
default back to inactive mode.
CONTROLS AND SETTINGS