Manual

When should the batteries be
replaced
1. There is not a "beep" anymore
from the indoor unit when using
the control remote or the signal
light indicator does not light.
2. The indoor unit does not respond
to the remote control commands to
activate the programs.
To replace batteries
1. Slide out the battery
compartment cover (located at
the back of the remote
control).
2. Install two AAA batteries in
the compartment (indicated in the
drawing located inside the
corn partment).
3. Slide in the cover.
4. if the remote control is not
operated for long period of times,
batteries should be discarded.
Remote control instructions
1. The signal reach distance of the
remote control to the receiver that
is inside the indoor unit of the air
conditioner is 32.8 ft. Any
obstruction placed between the
receiver and the remote control
can cause interference, limiting
the capacity of the programming.
2. Any time when a button is pressed
on the remote control, the air
conditioner emits a "beep" that
indicates that a command has
been received and transmitted to
the indoor unit.
3. When selecting the function of
timer, the remote control sends
(automatically) a signal to the indoor
unit at the specific period. If the
remote control is left in a position
that the signal is blocked, a 15
minute delay can be produced.
Attention
1. When replacing batteries, do not
use old batteries or a different
type battery.This maycausethe
remote control to malfunction.
2. If you do not usethe remote
controller for several weeks, ...................................................
remove the batteries.Otherwise
battery leakage may damage the
remote controller.
3. The average battery life under
normal useis about 6 months.
4. Replacethe batterieswhen there
is no answering beep from the
indoor unit or if the transmission
indicator fails to light.