Use & Care Guide

27
SETTING OVEN CONTROLS
To set a self clean cycle:
1. Press Self Clean. --- appears in the display.
2. Press until 3:00 appears in the display for a 3
hour self clean process, or push until 2:00
appears in the display for a 2 hour self clean process.
3. As soon as the controls are set, the motor driven lock
will begin to close automatically and the door locked
indicator light will flash. Do not open the oven door
while the light is flashing (allow about 15 seconds for
the oven door to lock).
4. CLn will appear in the display during the self clean
cycle, and the door locked light will glow until the self
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
When the self clean cycle has completed:
• The time of day will appear in the display window, and
the Clean key and door locked light will continue to
glow.
• Once the oven has cooled down for about 1 hour and
the door locked light has gone out, the oven door may
be opened.
• To avoid possible burns, use care when opening the
oven door after the self cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or
steam to escape.
To stop or interrupt a self clean cycle (once it has been
activated):
1. Press OFF.
2. Once the oven has cooled down for about 1 hour and
the door locked light has turned off, the oven door can
be opened.
3. Restart the self clean cycle once all conditions have
been corrected.
Setting Delay Start Self Clean
To start a delay self clean with default clean time of 3 hours
and a start time of 9:00 o’clock: Be sure the clock is set with
the correct time of day, the oven is empty, and all oven
racks are removed. Be sure oven door is completely closed.
1. Press Start Time and scroll to 9 0 0 and release
key.
2. Press Self Clean. --- appears in the display.
3. Press until 3:00 appears in the display for a 3
hour self clean process, or push until 2:00
appears in the display for a 2 hour self clean process.
4. The motor driven lock will begin to close automatically
and the door locked indicator light will flash. Do not
open the oven door while the light is flashing (allow
about 15 seconds for the oven door to lock).
5. CLn will appear in the display during the self clean
cycle, and the door locked light will glow until the self
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
If the cooktop is used during a self-clean cycle, the oven
may turn off. The oven control display will show “SCC"
for 5 seconds. The oven door will remain locked until the
oven has cooled down below cleaning temperature. If the
oven is below cleaning temperature, the user can start
another clean cycle immediately. If the oven is in cleaning
temperature range, another self-clean cycle can be set
once the door unlocks (up to 4 hours).
IMPORTANT
SCC message in display
If the cooktop is used during a self-clean cycle, the oven
may turn off. The oven control display will show “SCC" for
5 seconds. The oven door will remain locked until the
oven has cooled down below cleaning temperature. If the
oven is below cleaning temperature, the user can start
another clean cycle immediately. If the oven is in cleaning
temperature range, another self-clean cycle can be set
once the door unlocks (up to 4 hours).
NOTE