User Guide

26
Care & Cleaning Tips
Part What To Use Tips and Precautions
Interior & Door
Liners
Soap and water
Baking soda and water
Use two tablespoons of baking soda in
onequartofwarmwater.Be sure to
wring excess water out of sponge
or cloth before cleaning around
controls, light bulb or any electri-
cal part.
Door Gaskets Soap and water Wipe gaskets with a clean soft cloth.
Drawers & Bins Soap and water Use a soft cloth to clean drawer run-
ners and tracks.
Glass Shelves Soap and water
Glass cleaner
Mildliquidsprays
Allow glass to warm to room tempera-
ture before immersing in warm water.
Toe Grille Soap and water
Mildliquidsprays
Vacuum attachment
Vacuum dust from front of toe grille.
Remove toe grille (see Installation
Instructions). Vacuum backside, wipe
with sudsy cloth or sponge. Rinse and
dry.
Exterior &
Handles
Soap and water
Non Abrasive Glass Cleaner
Do not use commercial household
cleaners containing ammonia, bleach
or alcohol to clean handles. Use a
soft cloth to clean smooth handles.
DO NOT use a dry cloth to clean
smooth doors.
Exterior &
Handles
(Stainless Steel
Models Only)
Soap and water
Stainless Steel Cleaners
Never use CHLORIDE or cleaners
with bleach to clean stainless steel.
Clean stainless steel front and handles
with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a
soft cloth. Use a non-abrasive stainless
steel cleaner. These cleaners can be
purchased at most home improvement
or major department stores. Always
follow manufacturer’s instructions. Do
not use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry
with the grain to prevent scratch-
ing. Wash the rest of the cabinet with
warmwaterandmildliquiddetergent.
Rinse well, and wipe dry with a clean
soft cloth.
Replacing LED
Bulbs
Unplug refrigerator
Wear gloves
Remove light cover
Replace old LED bulb
Replace light cover
Plug in the refrigerator
CAUTION: Wear gloves when
replacing LED bulbs to avoid get-
ting cut.
Use same wattage when replacing LED
bulb.
CARE & CLEANING