Specification Sheet
INSTALLATION SPECIFICATIONS
•
Product Shipping Weight (approx.) – 170 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz, fused
on both sides of line with ground.
•
Connected Load (kW Rating) @ 240 / 208 Volts = 12.5 / 9.5 kW
•
Recommended Circuit Breaker – 40 Amps
•
Always consult local and national electric codes.
•
Make sure wall coverings around range can withstand heat generated by
range.
•
Floor beneath range MUST be solid and level.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets installed to
either side of appliance must be no less than maximum width of appliance.
•
Range can be installed flush to wall with 0" minimum rear clearance.
•
Minimum 1" clearance required from edge of rangetop to nearest combustible
wall on either side of range above 36" height.
•
Allow 30" minimum clearance between top of cooking surface and bottom
of unprotected wood or metal overhead cabinet; or 24" minimum clearance
when bottom of wood or metal overhead cabinet is protected by not less than
1/4" flame-retardant millboard covered with not less than no. 28 MSG sheet
steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
•
To reduce risk of fire when using overhead cabinetry, install range hood that
projects horizontally a recommended minimum of 5" beyond bottom of
cabinets.
•
Follow all dimension requirements provided to prevent property damage,
potential fire hazard, and incorrect countertop and cabinet cuts.
47
"
29
3
/16
3
/4
"
*Note: 30"
minimum clearance between top of cooking
surface and bottom of unprotected wood or metal
overhead cabinet; or 24"
minimum clearance when
bottom of wood or metal overhead cabinet is protected
by not less than 1/4" flame-retardant millboard covered
with not less than No. 28 MSG sheet steel, 0.015"
stainless steel, 0.024" aluminum or 0.020" copper.
0"
clearance is minimum for rear of range. Follow all
dimension requirements provided above to prevent
property damage, potential fire hazard, and incorrect
countertop and cabinet cuts.
30"
min.
13"
max.
Minimum
1"clearance
required
to nearest
combustible
wall on
either side
of range
above 36"
height
22"
6"
3
1
/2"
Shaded area allows for flush-to-wall
installation of rear wall electrical
outlet. (All dimensions for outlet
location are maximum.)
C
L
36"
stand.
30"
min.*
Wall
18"
min.
18"
min.
11"
30"
min.
30" Electric Freestanding Ranges with Front Controls (FC)
Baseline
Front
29
7
/8"
36
5
/8"
(Adjustable
to
±
1
/4"
max.)
Side
Power cord location
(middle bottom rear*)
*when viewed from front
25"
max.
26
"
Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca
Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FFEH3051V 03/19
© 2019 Electrolux Home Products, Inc.
FFEH3051VS
FRONT CONTROL RANGE
30" ELECTRIC