Use and Care Guide

21
SETTING OVEN CONTROLS
Setting the Clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash 12:00. It is recommended to always set the clock
for the correct time of day before using the appliance.
To set the clock:
1. Press Set Clock once (do not hold clock key down).
2. Within 5 seconds, press and hold or until
the correct time of day appears in the display.
Temperature display (Fahrenheit/Celsius)
The electronic oven control is set to operate in Fahrenheit
(°F) at the factory. The oven may be programmed for any
temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to Celsius (°C) or from °C to
°F:
1. Press Broil. — — appears in the display.
2. Press and hold until HI appears in the display.
3. Press and hold Broil until °F or °C appears in the display.
4. Press or to change °F to °C or °C to °F. To
accept the change, wait 6 seconds.
Setting Oven Lock
The control can be programmed to lockout the oven control
keys.
To activate the oven lockout features:
1. Press and hold the lock key for 3 seconds. Once the
controls are locked the with a lock icon will appear in the
display.
To cancel the oven lockout feature:
1. Press and hold the lock key for 3 seconds.
1. When the lock icon no longer displays, the oven control
keypad will be available for use.
Important: If a control key is pressed when oven lockout is
active, the control will triple beep indicating the key action is
not available when the oven lockout feature is active.
Setting the minute timer
1. Press Timer on-off.
2. Press to increase time in one-minute increments.
Press and hold to increase time in 10-minute
increments. The timer can be set for any amount of time
from 1 minute to 11 hours and 59 minutes.
3. When the desired time appears in the display, release
the
. The timer will begin to countdown in about 5
seconds.
4. To turn the timer off at any time Press Timer on-off.
5. When the set time ends, the timer will beep three times
and will continue to beep three times every minute until
Timer on-off is pressed.
To change the timer while it is in use:
While the timer is active and shows in the display, press and
hold
or to increase or decrease the time
remaining.
To cancel the minute timer before the set time has run
out:
Press Timer on-off once.
The minute timer will not start or stop the cooking
process. The minute timer can be used alone or while
using any of the other oven features. If another feature is
active when the minute timer is active, the minute timer
will show in the display. To view information about other
active features, press the key for that feature.
NOTE