Owner's Guide
Table Of Contents
- Table of contents
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Before Setting Surface Controls
- Cooktop Controls
- 1
- 1. Lock: Lock the cooktop controls to prevent accidental activation of cooking zones.
- 2. Power: Press to turn on or turn off the cooktop.
- 3. Cooking Zone Power Boil Indicator: Lights when the Power Boil feature is in use on the cooking zone.
- 4. Cooking Zone Setting Indicator: Shows the setting of the Cooking Zone when it is running. Flashes when the Cooking Zone does not detect proper cookware. Shows a Hot Cooktop message (H) when the Cooking Zone is off but still hot.
- 5. Cooking Zone On/Off: Activates the cooking zone when the cooktop is on.
- 6. Cooking Zone Minimum (1): Sets the cooking zone to the minimum power level.
- 7. Cooking Zone Set: Press or slide your finger on the wedge to select the desired cooking zone setting.
- 8. Cooking Zone Maximum (P): Sets the cooking zone to Power Boil.
- 9. Timer Indicator: Shows the time currently left on the timer.
- 10. Reduce Time (-): Reduce the amount of time on the timer.
- 11. Timer On/Off: Turn the countdown timer on or off.
- 12. Increase Time (+): Increase the amount of time on the timer.
- Figure 12: Induction cooking zone control
- 1. Place correctly sized cookware on the cooking zone.
- 2. Activate the cooking zone.
- 3. Set the cooking zone to the desired level (refer to the “Suggested induction cooking zone settings” in Table 1).
- 4. When cooking is complete, turn the induction cooking zone OFF by pressing its On/Off key or the Main Power key before removing the cookware. If all of the zones are off, the cooktop will automatically power off in 20 seconds.
- Suggested induction cooking zone settings
- Frigidaire Induction Recommendations
- Low
- 1
- Keep foods warm
- Medium
- Low
- 2-4
- Continue cooking, poach, stew
- Medium
- 5-6
- Maintain a slow boil, thicken sauces and gravies, steaming, cooking
- Medium
- High
- 7-8
- Continue a rapid boil, fry, or deep fry
- High
- 9
- Start most foods, maintain water at a boil, pan frying, searing
- Power
- Boil
- P
- Start heating pans that contain large amounts of food or to bring pots of water to boil
- Table 1: Suggested induction cooking zone settings
- Moving Cookware on a Smooth Cooktop
- Power Management
- Setting the Timer
- Lock or Unlock the Cooktop
- 1. Set the cooking zones to the desired settings.
- 2. Press the Lock key.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will activate, and L will display in all of the cook zone setting indicators.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will deactivate.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Hold the lock key for 4 seconds.
- 3. Set the cooking zones.
- 4. When the cooking process is finished and the cooktop is turned off, the Lock function will be still active.
- Key-Stuck Function
- Home Canning
- Setting Surface Controls
- Care and Cleaning
- Before You Call
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR
UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below instruc-
tions and precautions for unpacking, installing,
and servicing your appliance:
Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags
after unpacking the appliance. Never allow
children to play with packaging material. Do not
remove the wiring label and other literature
attached to the appliance. Do not remove model/
serial number plate.
Cold temperatures can damage the electronic
control. When using this appliance for the first
time, or when the appliance has not been used
for an extended period of time, be sure the
appliance has been in temperatures above 32ºF
(0ºC) for at least 3 hours before turning on the
power to the appliance.
Never modify or alter the construction of the
appliance by removing the leveling legs, panels,
wire covers, anti-tip brackets/screws, or any other
part of the appliance.
Be sure to have an appropriate foam-type fire
extinguisher available, visible, and easily acces-
sible located near the appliance.
GROUNDING INSTRUCTIONS
Proper Installation—Be sure your appliance is
properly installed and grounded by a qualified
technician. In the United States, install in accor-
dance with the National Fuel Gas Code ANSI
Z223.1/NPFA No. 54, latest edition and National
Electrical Code NFPA No. 70 latest edition, and
local electrical code requirements. In Canada,
install in accordance with CAN/CGA B149.1 and
CAN/CGA B149.2 and CSA Standard C22.1,
Canadian Electrical code, Part 1-latest editions
and local electrical code requirements. Install only
per installation instructions provided in the litera-
ture package for this appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be securely connected to an
electrical outlet or junction box that is the correct
voltage, is correctly polarized and properly
grounded, and protected by a circuit breaker in
accordance with local codes.
It is the personal responsibility of the consumer to
have the appropriate outlet or junction box with
the correct, properly grounded wall receptacle
installed by a qualified electrician. It is the respon-
sibility and obligation of the consumer to contact a
qualified installer to assure that the electrical
installation is adequate and is in conformance
with all local codes and ordinances.
See the installation instructions packaged with
this appliance for complete installation and
grounding instructions.
Avoid fire hazard or electrical shock. Failure to
follow this warning may cause serious injury,
fire, or death.
Avoid fire hazard or electrical shock. Do not use
an adapter plug, use an extension cord, or
remove grounding prong from the power cord.
Failure to follow this warning may cause serious
injury, fire, or death.
WARNING