Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING:
remote
sensing
temp/timer
auto /
hi []reed
to
filter
reset
V ON-OFF A FAN SPEED
"x_ PRESS A TO RAISE
I "PRESSV TO LOWER
sleep
YOU WILL SEE;
remote
sensing
temp/timer
F
m
auto /
hi [] fitter
reed
to reset
V ON-OFF A FAN SPEED sleep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
60 °F (16 °C) and 90 °F (32 °C). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO ADJUST FAN SPEEDS;
remote
sensing
temp/timer
auto j
hi [] filter
med
to reset
V ON-OFF A FAN SPEED sleep
\
DO THIS:
YOU WILL SEE:
remote
sensing
temp/timer
auto j
medhi filter
to [] reset
V 0N-0FF A FAN SPEED steep
PRESS TO SELECT
TO USE AUTO FAN FEATURE:
remote
sensing
temp/timer
auto /
medhi filter
Zo, reset
V 0N=0FF A FAN SPEED
DO THIS:
sleep
PRESSFAN BUTTON,
CHOOSE AUTO
YOU WILL SEE;
remote
sensing
temp/timer
F
m
auto m /
hi filter
med
So reset
V ON-OFF A FAN SPEED steep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed.
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.