Installation guide

To secure lower sash in place, attach right angle sash lock with 3/4" (19mm) screw as shown (FIG. 10).
NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by
window itseF.
Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11).
FIG. 10 FIG. 11
FOAM SEAL
After the completion of the installation, please check the machine's lean as shown (FIG. 12A & FIG. 12B). It's
necessary for proper condensed water utilization and drainage.
" l
OUTSIDE INSIDE ]
FIG. 12B
OUTSIDE
-G
about I
1/4"~1/2"
Wooden Window
Vinyl-Clad Window
Rail
Trim the weather seal (6"X3/4"Xli12") with a proper length,
peel off the protective backing and plug any gaps if needed
as shown FIG.13.
Removing the air conditioner From Window
Turn the air conditioner off, and disconnect power cord.
Remove sash seal from between windows, and unscrew sash lock.
Remove screws installed through frame and framelock, oo_....
Close (slide) side panels into frame.
Keeping a firm grip on air conditioner, raise sash and
carefully remove. \o
Be carefu_ not to spill any condensate water wNe lifting .....
unit from window. Store parts WITH air conditioner.