Complete Owner's Guide h

Operating Instructions

(continued)

TO TURN UNIT OFF: YOU WILL SEE:

DO THIS:

PRESS

ON/OFF BUTTON

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.

The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.

This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue

to run during this time.

The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), 55F

and 80F degrees (in heat mode).

There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of

having to roll through to select another mode.

After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.

FAULT CODES:

If the display reads "HS" , a sensor has

failed. Contact your Authorized Frigidaire

Service Center.

If the display reads "AS" , a sensor has

failed. Contact your Authorized Frigidaire

Service Center.

If the display reads "ES" , a sensor has

failed. Contact your Authorized Frigidaire

Service Center.

TO CHANGE TEMPERATURE DISPLAY:

YOU WILL SEE:

DO THIS:

PRESS AND HOLD THE

UP/DOWN BUTTONS

TOGETHER FOR 3 SECONDS

Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.

Note: When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to dissipate residual heat within the unit.