FRIGIDAIRE Packac Air Conditioner Feai Www:fdgidaire:€om [L800_265_8352
ThisUSE&CARE MANUAL provides specific operating instructions foryourmodel. Usetheroomairconditioner onlyas instructed inthisUSE & CARE MANUAL. These instructions arenotmeanttocovereverypossible condition andsituation that mayoccur. Common sense andcaution mustbepracticed wheninstalling, operating, andmaintaining anyappliance. For Your Safety The power supply cord with this air conditioner Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Product Registration Record Your Hodei and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the cabinet. Model No, Serial No Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company. Packaging Remove all packaging from inside the carton, inserts placed into the side louvers.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you CLEAN AIR FEATURE (some models) -- REMOTE TEMP desire. The unit can be controlled SENSING INDICATOR DISPLAYS (some models) __ TEMPERATURE/TIME T clean • a,r _ \ cool remote _ I econ sensing _ \ timer ononly MODE I _ V ON-OFF SETS MODE -j L r-- ¢- [_ "_ TEMP/TIMER o 5 stee
Operating Instructions (continued) TO CHANGE TEMPERATURE SETTING; YOU WILL temp/timer temp/timer remote sensing V mm 0N=0FF "_ A hi, fitter med auto lo i FAN SPEED steep FAN SPEEDS: V ON=OFF YOU WILL temp/timer A hi , med auto So fitter J reset FAN SPEED steep SEE; temp/timer hi, fitter reed auto Zo ON-OFF m Note: Tap or hold either up ( A ) or down ( V ) button until the desired temperature is seen on the display.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE: temp/timer temp/timer dean air timer _ \ [] cool econ mm remote sensing fan only MODE V 0N-0FF A \ \ air timer function, CHOOSE FAN ONLY timer _ FEATURE: \ | remote sensing cool econ ,fan on@ MODE V V ON-OFF A (Remember ON-OFF A to open the vent during but keep it closed during cooling efficiency.) prefer. During (Except "Auto Fan").
Operating Instructions (continued) TIMER: YOU WILL DELAY STOP J START FEATURE SEE HOW MUCH TIME IS CHOSEN: ternp/timer c[eall _ [] cool econ \ air fan only temp/timer | remote sensing Hr dean air \ v ON-OFF A THEN DO THIS: DO THIS; PRESS UP/DOWN BUTTONS PRESS TIMER BUTTON For Delay Stop, the unit must be in the On position. Note: For Delay Start, the unit must be in the Off position. First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow at 0.
Operating Instructions (continued) REMOTE SENSING FEATURE (on some models). LIGHT _L PRESS REMOTE SENSING ( On & Off intermittently cool econ dean air DO THIS: pulsing fanonly timer remote sensing MODE ).
Operating Instructions (continued) TO TURN YOU WILL UNIT OFF: SEE; temp/timer remote sensing V hi, reed auto Io ON=OFF A FAN SPEED PRESS DO THIS; ON/OFF BUTTON fitter reset remote sensing steep V hi reed |autolo temp/timer ON-OFF A fitter reset i FAN SPEED steep I ADDITIONAL THINGS YOU SHOULD KNOW Now thatyou have masteredthe operatingprocedure,hereare more featuresinyourcontrolthatyou shouldbecome familiar with /_ • preventscircuit overheating of the compressor • This Th
III Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Care and Cleaning Air Filter Cleaning The air filter should be checked necessary. particles Trapped of frost on the cooling Push the • Open the • Grasp the • Wash the at least once a month in the filter can build to see if cleaning up and cause is an accumulation coils. vent handle to the Vent Closed position(where applicable). front panel.
Before calling forservice, reviewthislist.It maysaveyoutimeandexpense. Thislistincludes common occurrences thatarenot theresultofdefective workmanship or materials inthisappliance. OCCURRENCE SOLUTION Air conditioner will not operate. Wall plug disconnected. Plug Current House fuse blown Control Air from unit does not feel cold enough. Device Tripped. Press the or circuit breaker is OFF. Turn Control Room temperature 60°F Push plug firmly below into wall outlet. RESET button. tripped.
Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
