Manual

Manual Operation
Safety Lock
Using Quick Start
1. Press Timer pad once.
2. Enter desired time using number pads.
(timer may be set up to 99 minutes
and 99 seconds).
3. Press pad .
Example: setting timer for 5 minutes
Example: to set the safety lock ON:
Example: to change the safety lock from ON to OFF
When finished, you will hear a series of beeps.
You may lock the control panel to prevent the microwave
from being accidentally started or used by children.
The safety lock feature is very useful when cleaning the
control panel. The lock will prevent accidental programming
when wiping the control panel.
than 3 seconds. The lock icon will appear in the
display window with 1 beep.
Example: to quickly heat for 2 minutes at 100% power:
than 3 seconds. The lock icon will disappear in
the display window with 1 beep.
Microwave heating or cooking may be quickly set at 100% power
level for 1-9
minutes. Use the number keys 1-9
to choose the
desired minutes of cook time (this option will
only work using
the 1-9
numeric pads.)
Setting the timer
9
Stop/Cancel pad for more
pad for more
Stop/Cancel
microwave will start at once.
Timer
again
Heating with high power level
1. Use the number pads to enter desired
heating time.
NOTE: For time sets that start with numbers 1 - 9, the
remaining numbers must be entered within 2
second from the first key press, otherwise the
2. Press pad.
When finished, you will hear a series of beeps.
Example: to heat for 5 minutes and 30 seconds at 100%
power:
Heating with lower power levels
Using the highest power level to heat foods does not
always give the best results when some types of food need
slower cooking, such as roasts, baked goods or custards.
Your oven has nine other power levels you may choose.
START/+30sec pad.
When finished, you will hear a series of beeps.
Example: to heat for 4 minutes and 30 seconds at 70%
power:
Enter cook time.
4. Press
NOTE: For time sets that start with numbers 1 - 9, the
remaining numbers must be entered within 2
second from the first key press, otherwise the Quick
Start time will be used.
1.
2. Press Power Level pad once for power level
3.
Press Power Level four times to
change to 70% power level. PL-70
appears in the display.
Press and hold the
Press and hold the
Press number pad for desired minute(s). The
START/+30sec
Quick Start time will be used.
PL-HI.