Refrigerator User's Manual

9
DOOR REMOVAL INSTRUCTIONS
To remove the refrigerator doors:
1 Trace lightly around the door’s top hinges
with a pencil. This makes reinstallation
easier.
2 Disconnect the harness by grasping both
sidesoftheconnectorrmly,depressthe
latch, and pull apart. Remove the two (2)
screws from the top hinge. Lift the door
off of the bottom hinge and set it aside.
Getting through narrow spaces
Ifyourrefrigeratorwillnottthroughan
entrance area, you can remove the doors.
Checkrstbymeasuringtheentrance.
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Open the freezer drawer and remove the
toe grille (see “Installation” section).
3 Remove any food from the door shelves
and close the doors.
To remove the top hinge covers:
1 Remove the two (2) screws from each
cover over the top door hinges.
2 Lift inside edge of hinge cover and tilt
back.

NOTE
DO NOT remove the ground screw from
hinge.
Rear
cover
screw
Ground
screw
Top
hinge
Front
cover screw
Top hinge
cover
Hinge
screws
Multi-wire
cables
Leave
hinge
with
door