Installation guide

UPPER DUCT COVER MOUNTING TEMPLATE
USE 3/16" DRILL
INSTALL WITH ITEMS # 8 & 9
2 PLACES
CUT ALONG THIS LINE
CEILING
! ( cut on this line to locate template
poss 7 at ceiling location. )
UPPER MOUNTING BRACKET - ITEM # 3
Note: Place this template in ceiling corner to mount
| upper bracket for chimney cover.
pout
BRACKET
WITH
NOTCH
UP
USE 3/16" DRILL
INSTALL WITH ITEMS # 8 & 9
2 PLACES
WY
-LOWER DUCT COVER MOUNTING BRACKET - ITEM # 4
RANGE HOOD LOCATION INSTRUCTIONS:
- LOCATE CENTER OF COOKTOP
: - DRAW VERTICAL LINE ON WALL TO CEILING
- FROM INSTALLATION GUIDE CHART - DETERMINE DESIRED
! VENT HOOD HEIGHT
- DRAW HORIZONTAL LINE AT THIS HEIGHT
- LOCATE AND TAPE TEMPLATE TO THE WALL FOR PROPER
UPPER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 11
2 PLACES
15.67 | INSTALLATION
- REPER TO INSTALLATION MANUAL FOR PROPER ASSEMBLY
NOTE: LOWER AND UPPER MOUNTING HOLES ON RANGE HOOD
BODY SHOULD BE ATTACHED TO WOOD STRUCTURE TO
| SUPPORT 150 LBS.
REFER TO INSTALLATION GUIDE FOR DETAILS
) UPPER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 11
| , . 2 PLACES
| | |
7.88
|
Z
21.46
!
- 10.73 -
! -~-— ¢—-—-—- —- —- —- —-—- —- —-—-_- f— ~~ - - - - —- -- - _- _- _- _- —-—-_-
1.69
BOTTOM OF RANGE HOOD
( cut on this line to locate templates
at correct installation height. )
RANGE HOOD MOUNTING TEMPLATE FOR: FHWCS3O55LS
> \_ cENTERLINE OF PRODUCT LOCATION SHOULD MATCH CENTER OF COOKTOP
PN: 316902462