Installation guide

How to Install

Installation

Extend the side panels out against the window frame (FIG. 7A for wooden windows), (FIG. 7B for Vinyl-Clad

windows).

FIG. 7A

window

frame

Place the frame lock between the frame extensions and the window sill as shown (FIG. 8A for wooden

windows), (FIG. 8B for Vinyl-Clad windows).

FIG. 8A

A: For wooden windows:

Drive 1/2″ (12.7 mm) locking screws through the frame lock and into the window sash (FIG. 9B). NOTE:

Before driving the screws, use a drill to drill 5 holes through the holes in the frame lock and frame extensions

into the windows sash as shown ( FIG. 9B).

B: For Vinyl-Clad windows:

FIG. 8B

FIG. 7B

Drive 1/2″ (12.7 mm) locking screws through the frame lock and into the sill (FIG. 9A). NOTE:To prevent

window sill from splitting, drill 1/8″ (3mm) pilot holes before driving screws. Drive 1/2″ (12.7 mm) locking

screws through frame holes into window sash (FIG. 9B).

FIG. 9A

FIG. 9B

Drive locking screws:

wooden windows: Vinyl-Clad windows:

Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air

conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail

of the unit.

Wooden Windows

INSIDE

OUTSIDE

FIG. 6A

INSIDE OUTSIDE

FIG. 6B

Vinyl-Clad Windows