Complete Owner's Guide (English)
25
OVEN CONTROLS
Setting Self Clean Cycle Duration
The self clean key controls the self cleaning feature. If you
are planning to use the oven directly after a self clean cycle
remember to allow time for the oven to cool down and the
oven door to unlock. This normally takes about one hour.
So a 3 hour self clean cycle will actually take about 4 hours
to complete.
It is recommend to use a 2 hour self clean cycle for light
soils, a 3 hour cycle for average soils, and a 4 hour cycle for
heavy soils (to assure satisfactory results).
To set the controls for a 3 hour self cleaning cycle to
start immediately and shut off automatically:
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press self clean. CLn and 3:00 HR will show in the
display. The control will automatically clean for a 3 hour
period (default self cleaning cycle time). If a 2 or 4 hour
clean time is desired, press self clean multiple times to
toggle between 2, 3 or 4 hours.
3. Press start. A beep will sound and the DOOR and
icon will flash; CLn will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the DOOR indicator light and
icon will remain on. Also, the oven icon will appear
in the display. Allow about 15 seconds for the oven door
to lock completely.
When the Self Clean cycle is completed:
1. HOT will appear in the display. The time of day, the
DOOR and icon will remain in the display.
2. Once the oven has cooled for approximately 1 HOUR,
the DOOR icon will flash until the door unlocks, The
door can be opened and timer will revert back to the
time of the day.
Stopping a Self Clean Cycle
If it becomes necessary to stop or interrupt a self cleaning
cycle due to excessive smoke or fire in the oven:
1. Press off.
2. The oven door can only be opened after the oven has
cooled down and the DOOR icon will flash until the door
is unlocked, the oven door can then be opened and the
timer will revert back to the time of the day.
The self clean and delay start keys control the Delayed
Self Clean operation. The automatic timer will turn the oven
on and off at the time you select in advance.
To set the control for the self cleaning cycle to start at a
delayed time and shut off automatically (example: 3
hour self clean cycle to start at 4:30):
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press self clean. CLn and 3:00 HR will show in the
display. The control will be set for a 3 hour clean period.
If a 2 or 4 hour clean time is desired, press self clean
multiple times to toggle between 2, 3 or 4 hours.
3. Press start. A beep will sound and the DOOR and
lock icon will flash; the letters CLn will remain on in the
display.
4. Press delay start. Enter the desired start time using the
number keys 4 3 0.
5. Press start.
6. delay, DOOR and icons will remain on.
7. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the DOOR and indicator light
will remain on.
8. The control will start the self cleaning at the set start
time, for the period of time previously selected. At that
time, the delay message will go out; CLn and oven icon
will appear in the display.
When the self clean cycle is completed:
1. HOT will appear in the display. The time of day, the
DOOR and icon will remain in the display.
2. When oven cools approximately 1 HOUR, the DOOR
icon will flash until the door is unlocked, the oven door
can then be opened and the timer will revert back to the
time of the day.