Complete Owner's Guide

35
SETTING OVEN CONTROLS
Setting Self Clean
To set self clean:
1. Be sure the oven is empty and all oven racks are
r
emoved. Remove all items from the oven. Be sure
oven door is completely closed.
2. Press Self
Clean. The default 3 hour clean time will
appear in the display. You may accept the 3 hour clean
time or choose a different clean duration by entering
any time between 2 and 4 hours clean time by entering
the time using the numeric keys.
3. Press OK/ST
ART. The warning to REMOVE RACKS
will flash in the display to remind you that oven racks
should be removed before a self clean.
4. Press OK/ST
ART to activate self clean.
5. The warning will end and the mo
tor door lock will begin
locking the oven door and Self Clean will start.
Important: Do n
ot open the oven door while the lock motor
is running or when any locking indicators or displays are
showing. The oven door is completely locked in about 15
seconds. Once the oven door has locked, CLEAN will
appear in the display indicating self clean has started.
Do not force the oven door open when self-clean is active.
This can da
mag
e the automatic door-locking system. Use
caution when opening the door after self-clean cycle is
complete; the oven may still be very hot.
When self clean is finished:
1. CLEAN m
essage will turn off, and Hot will appear in
display window.
2. Once the oven has cooled down (about 1 hour) and Ho
t
is no longer displayed, the oven door may be opened.
3. When the oven interior has completely cooled, wipe
aw
ay any residue or powdered ash with a damp cloth or
paper towel.
Setting Delay Start Self Clean
To start a delay self clean with
d
efault clean time of 3
hours and a start time of 9:00 o’clock:
1. Be sure the clock is set with the correct time of day, the
ov
en is empty, and all oven racks are removed. Be sure
oven door is completely closed.
2. Press Self Clean
3. Press Dela
y Start.
4. Using nu
meric keypad, enter 9 0 0.
5. Press OK/ST
ART to accept.
If it becomes necessary to stop s
elf clean when active:
1. Press OFF.
Important: If sel
f clean has heated the oven to a high
temperature, allow enough time for the oven to cool. Before
restarting self clean, be sure to read important notes below.
Important note:
• If your clock is set with the (default) 12 hr display mode,
the delay
start for a self clean can only be programmed
to start up to 11 hours and 59 minutes after the time
showing in the display (be sure to set the clock to
current time before programming a Delay Start). To set
a delay start Self Clean to begin 12 or more hours
(maximum is 23 hours and 59 minutes) after the time of
setting, be sure to first set the control in the 24 Hr
display mode.
• If self
clean was active and then interrupted by a power
failu
re or canceled before the oven was thoroughly
cleaned, it may be necessary to run another self clean
cycle.
• If the oven temperature was h
igh enough when self
clean was interrupted the oven control may not allow
another self clean cycle to be set for up to 4 hours.
To avoid possible burns, use care when opening the oven
door after the self-cleaning cycle. Stand to the side of the
oven when opening the door to allow hot steam and air to
escape.
CAUTION