Manual

Yourdishwashercleansbysprayingamixtureofhotwateranddetergentthroughthesprayarms
againstsoiledsurfaces.First,thedishwasherdrainsforafewsecondstoremovesoilsdroppedwhile
loading,thenfillswithwatercoveringthefilterarea.Wateristhenpumpedthroughthesprayarms.Soil
particlesgothroughandacrossthefilteranddownthedrainasthewaterispumpedout.Thisseriesof
stepsarerepeatedasneeded.Thenumberofwaterfillsvarieswiththecyclebeingused.
Features may vary according to model
Upper Spray Arm
Tub Gasket
Cup Shelves
Upper Rack
Middle Spray
Arm
Basket
Bottom Rack
Lower Spray
Arm Filter
Detergent Serial
Dispenser Label
(located on
Rinse Aid right side of
Dispenser door)
Operating Instructions
Getting Started
1. Load Dishwasher (See Preparing and Loading
Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
3. Add Rinse Aid, if needed (See Rinse Aid).
4. Close door to latch.
5. Select desired CYCLE (See Cycle Chart). The
indicator light above the pad will glow when
selected,
6. Select desired OPTION (See Energy Options).
The indicator light above the pad will glow when
selected,
7. Run hot water faucet nearest dishwasher until
water is hot. Turn water off.
8. To start, press START pad.
Property Damage Hazard
Before starting dishwasher be sure that the water
is connected and turned on. Failure to do so
may cause damage to the pump seal and result
in water leakage.
Recommended Cycle for typical
use:
The Normal cycle with its factory default options
of normal temperature and heated dry together
provide the best all around performance. This
cycle selection is recommended for everyday use
and is suitable for a large range of both dish load
sizes and food quantities remaining on those
dishes.