Manual

CPispel's (:some models)
The crispers, located under the bottom
refrigerator shelf, are designed for storing fruits,
vegetables, and other fresh produce. Wash
items in clear water and remove excess water
before placing them in the crispers. Items with
strong odors or high moisture content should be
wrapped before storing.
o The appliance should be
located in the coolest area
of the room, away from
heat-producing appliances
or heating ducts, and out
of direct sunlight.
Let hot foods cool to
room temperature before
placing in the unit. Overloading the unit forces the
compressor to run longer. Foodsthat freeze too
slowly may lose quality or spoil.
Be sure to wrap foods properly and wipe containers
dry before placing them in the appliance. This cuts
down on frost build-up inside the unit.
Appliance shelves and baskets should not be lined
with aluminum foil, wax paper,or paper toweling.
Liners interfere with cold air circulation, making
the unit less efficient.
Organize and label food to reduce door openings
and extended searches. Remove as many items
as needed at one time, and close door as soon
as possible.
Damp objects stick to cold metal surfaces.
Do not touch interior metal surfaces with
wet or damp hands.
Appliance must be unplugged (to avoid
electrical hazard) from power source when
defrosting unit.
Convertible model is frost free and will defrost
automatically, but should be cleaned occasionally.
Cleaning the Inside
Wash inside surfaces of the unit with a solution of
2 tbsp. (25 g) of baking soda in 1 qt. (1 I) warm
water. Rinse and dry. Wring excess water out of
the sponge or cloth.
Wash the removable parts with the baking soda
solution mentioned above or mild detergent and
warm water. Rinse and dry. Never use metallic
scouring pads, brushes, abrasive cleaners, or
alkaline solutions on any surface. Do not wash
removable parts in a dishwasher.
Cleaning the Outside
Wash the cabinet with warm water and mild liquid
detergent. Rinse well and wipe dry with a clean
soft cloth. Replace parts and food.
Do not use razor blades or other sharp
instruments, which can scratch the surface when
removing adhesive labels. Any glue left from the
tape can be removed with a mixture of warm
water and mild detergent, or touch the residue
with the sticky side of the tape already removed.
DO NOT REHOVE THE SERIAL PLATE.
If leaving door open while on vacation, make
certain that children cannot get into the
appliance and become entrapped.