Use & Care Guide

21
Gallery and Professional
CONTROLS AND SETTINGS
Temperature Adjustment
Adjust the temperature gradually: adjust in small increments, allowing the
temperature to stabilize.
• For colder temperatures, press the Temp button to change the temperature
setting toward Coldest.
• For warmer temperatures, press the Temp button to change the temperature
setting toward Cold.
Air Filter
The filter status light on the control panel will prompt you to replace the filter after 6
months. After replacing the air filter, the air filter status on the control panel should be
reset. To reset, Press and hold for 3 seconds.
Door Alarm
If the door is left open for 5 or more minutes, the door alarm will sound. Clear the
alarm by closing the door or by pressing any button.

NOTE
Pressing the Temp button will scroll through the 5 temperature settings toward the
coldest setting, and then loop back to the least coldest setting.
Adjusting the refrigerator control will change temperature in both compartments. The
freezer control can be left at the factory preset (*Recommended) or adjusted as desired.
To maintain temperatures, a fan circulates air in the refrigerator and freezer
compartments. For good circulation, do not block cold air vents with food items.
Cold
Colder 1
Recommended
Colder 2
Coldest