User Manual

11
To reverse refrigerator/freezer handles:
Handles may be easier to reverse while doors
are off. Reverse freezer and refrigerator
handles as shown.
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and cause
personal injury.
To attach plastic refrigerator handle:
1. Place bottom of handle over mounting
screw and pull up while holding the handle
at an angle towards the side of the door.
2. Rotate the handle over the corner of the
door until handle is aligned with screw
holes on top of door.
3. Secure top of handle with two screws.
To attach plastic freezer handle:
1. Place top of handle over mounting screw
and pull down while holding the handle at
an angle towards the side of the door.
2. Rotate the handle over the corner of the
door until handle is aligned with screw
holes on bottom of door.
3. Secure bottom of handle with two screws.
HANDLE INSTALLATION
To remove plastic refrigerator handle:
1. Remove two screws attaching handle to
top of refrigerator door.
2. Rotate handle towards the side of the
door and push down to release it from the
mounting screw.
3. Remove mounting screw from door and
install on other side, moving hole plugs
from corresponding to opposite side.
To remove freezer handle:
1. Remove two screws attaching handle to
bottom of freezer door.
2. Rotate handle towards the side of the
door and push up to release it from the
mounting screw.
3. Remove mounting screw from door and
install on other side, moving hole plugs
from corresponding to oposite side.
4. Self-Adhesive Nameplate Models: Use
plastic putty knife to gently peel off
nameplate from door and reapply over old
holes.
Handle
Screw
Lock Handle
over
Dovetail Screw
Dovetail
Screw
Screw
Dovetail
Screw
Handle
Button
Plug
Lock Handle
over
Dovetail Screw