Installation guide

4.PreparethewallsleeveforinstallationofthenewunitperthefollowingBrandinstructions.
#1Emerson 15"Deep
#2Fedders 19_/4"Deep
#3FeddersorFriedrich 16¾"Deep
#4GeneralElectric/Hotpoint16V8"Deep
#5SearsorCarrier(51SSeries) 18Y8"Deep
#6Whirlpool t7_/_"Deep
#7Whirlpool 23"Deep
#8White-Westinghouse/Frigidaire/16"+17½"Deep
Carrier(52FSeries)
#9White-Westinghouse/Frigidaire22"Deep
5.Identifyyourwallsleevetypeandfollowtheinstructionsforthattypeinthefollowingpages.
t Thisunit'sincreasedperformancecharacteristicsresultfromhavingtworearairintakes.
• Itisveryimportantthattheseinstallationinstructionsarefollowedsoyourunitcanoperateatmaximum
efficiency.
Ifthereisanexistingsleeveandthereisanexistingreargrilleitneedstobereplacedbyonethathasbeen
shippedwiththeunitintheaccessorykit.
FORINCREASED EFFICIENCY, UTILIZE THE PROVIDED LOUVERED REAR PANEL
installation of new grille provided with unit
t. Remove the existing grille.
2. Place the grille included with the new air conditioner towards the rear of the sleeve.
3. Mark through the hole positions.
4. Drill through the sleeve flanges with a 1/8" drill bit.
5. Attach the new grille with self-threading screws and washers(not included).
6. It is VERY IMPORTANT that the grille is placed exactly as shown.
7. Most decorative exterior grilles may be left in place as long as the proper interior air direction grille is installed.
NOTE: If the provided grill is not used, it may lead to product damage and possible failure.