Installation Instructions

REVERSING DOOR

Reversing the hinge

ROUND PLUG

SQUARE PLUG

HINGE SCREWS

OUT

1 Carefully pull out the 2 small round hole plugs from

the front panel and save. Remove and save the

square “T” slot cover by sliding it up and pulling

it out. Move all 3 plugs to the opposite side of the

front panel and insert.

2 Turn inner door assembly over to expose retaining

tabs of metal strike. Grip tabs fully with pliers to

remove. Discard old metal strike.

4 From the back side of the inner door, pinch the

retaining tabs of the plastic square plug to release

it. Save square plug for reinstallation.

5 Carefully remove the 2 round plugs from the inner

door and move them to the opposite holes and

reinstall.

6 Rotate the hinge and move it to the opposite side

of the inner door. Attach it with the 2 pan head

screws removed previously. Reinstall plastic plug in

the square hole next to the hinge.

3 Turn the inner door assembly back over and locate

the 2 pan head hinge screws. Remove and save the

2 screws and separate the hinge from inner door

assembly.