Installation guide

5. Check the available electrical service
Power supply must be the same as that shown on the unit serial
nameplate. (See Use & Care Guide for serial plate location.) Power
cord is 48″ long. Be sure you have an outlet near.
Installation Instructions
4. Check for anything that could block airflow
Check area outside of window for things such as shrubs, trees, or awnings. Inside, be sure furniture, drapes, or blinds
will not stop proper air flow.
All models have a 3-prong service plug to provide proper service and
safe positive grouding. Do not change plug in any way. Do not use an
adapter plug. If your present wall outlet does not match your plug, call
a qualified electrician to make the needed change.
6. Carefully unpack air conditioner
Remove all packing material. Protect floor or other stable flat surface
with covering to prevent scratches from unit. With the aid of an
assistant, remove unit from styrofoam base and rest on protected
surface. Move and install unit with the aid of an assistant. Save
packing and shipping box for future unit storage.
Tools Required
a large flat blade screwdriver tape measure
pencil
adjustable wrench or pliers
level Socket wrenches
Phillips screwdriver
2
Hardware ( in plastic bag)
Qty.
2 ea
7
7/16″ Locking Screw and Flat
Washer for window filler panels
Qty.
2
10
1/2″ Long hex head screw
Safety Lock
1
Long hex-head locking screw for top
angle rail, side retainer 5/16″ long
2
5
2
2
Hardware ( in plastic bag)
1/2″ Long Screw
and locknut
3/4″ Long Flat Head Bolt
and Locknut
foam insert
4 ea
2 ea
Sill Angle Bracket
Safety Lock
(for Vinyl-Clad window)
Locking screw #10 X 1/4″ panhead
Phillips screws (for Vinyl-Clad window)
weather stripping
(10″X3/4″X1/12″)
Accessory Kit includes
Hardware bag(shipped inside
window support brackets)
Window support bracket (2)
Side retainer (2)
Window Filler Panel (2)
Insulation panel (2)
MEDIUM models only HEAVY DUTY top angle rail can be
found in carton base packaging (FIG.3)
Ruler
Foam gasket
Top angle rail
Bottom rail seal
Window sash seal
HEAVY DUTY
(22,000~28,500BTU)
TOP ANGLE RAIL
FIG.3
Avoid fire hazard or electric
shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong
from the power cord.
WARNING
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
230V
20A
230V
15A
115V
15A
Grounding Prong
Remark: The appearance of actual plug may
be slightly different from the line drawing shown
in the figure. The line drawings are for
reference only.
230V
30A