Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY"
t t_mp/um_ auto 1
__ _ reset
FAN SPEED steep
I "" /DO THIS;
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
TO TURN UNIT OFF;
temp/timer auto 1
m rnehj" fitter
to reset
V ON-OFF A FAN SPEED steep
YOU WILL SEE:
Letup!timer 1
i_ F auto
I mYJ" fitter
Io reset
V ON-OFF A FAN SPEED steep
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
YOU WILL SEE:
temp/timer
auto )
mehj fitter
lo reset
V ON-OFF A FAN SPEED steep
[_ DO THIS:
PRESS
ON/OFF BUTTON
Note: If the unit is turned off in heat mode (if applicable) or
fan only mode, it will return to the same setting when it is
turned on again. When the unit is turned off in cool or energy
saver(econ) mode, it will run in energy saver(econ) mode
when it is turned on again, but the setting of temperature
and fan speed will remain.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
® The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. /_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
. The control will maintain the set temperature within 1 degrees Celsius, between 16 °C and 32 °C.
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Figure 1 (VENT CLOSED)
Fresh Air Vent Control (on some models)
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (see Fig. t)
2. Draw fresh air into the room - Fresh Air (see Fig. 2)
3. Exchange air from the room - Vent Open (see Fig. 3)
Figure 2 (FRESH AIR) Figure 3 (VENT OPEN)
@2009 Electrolux Home Products, Inc. All rights reserved.
9