Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING;
f temp/timer . "_
F aUtO []
=! I
]sensing _II_ _ med !
0N-OFF A FAN SPEED
"_ [ / DOTHIS;
_k PRESS A TO RAISE
I "PRESS V TO LOWER
fitter
reset
steep
YOU WILL SEE;
temp/timer auto []
to
fitter
reset
0N-0FF A FAN SPEED steep
Note: Tap or hold either up ( ^ ) or down ( V ) button until
the desired temperature is seen on the display, This tempe-
rature will be automatically maintained anywhere between
60 °F (t6 °C) and 90 °F (32 °C) . If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS;
ON-OFF
auto [] )
' fitter
Io reset
A FAN SPEED steep
DO THIS:
YOU WILL SEE;
temp/timer F _ mh_aut°lo[] I
fitter
reset
ON-OFF A FAN SPEED steep
PRESS TO SELECT
TO USE AUTO FAN FEATURE;
_temp/timer )
F auto I
remote bin(Inn _ hi I
SPEED
DO THIS;
fitter
reset
steep
PRESS FAN BUTTON,
CHOOSE AUTO
YOU WILL SEE;
tamp/timer auto []
F
J
lo
fitter
reset
ON-OFF A FAN SPEED steep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed,
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.