Installation guide

ManualsBrandsFrigidaire ManualsRoom air conditionerOfficial Frigidaire room air conditioner

4. Check for anything that could block airflow

Check area outside of window for things such as shrubs, trees, or awnings, inside, be sure furniture, drapes, or blinds

will not stop proper air flow.

5. Check the available electrical service

Power supply must be the same as that shown on the unit serial

nameplate. (See Use & Care Guide for serial plate location.) Power

cord is 48" long. Be sure you have an outlet near.

All models have a 3-prong service plug to provide proper service and

safe positive grouding. Do not change plug in any way. Do not use an

adapter plug. If your present wall outlet does not match your plug, call

a qualified electrician to make the needed change.

6. Carefully unpack air conditioner

Remove all packing material. Protect floor or other stable flat surface

with covering to prevent scratches from unit. With the aid of an

assistant, remove unit from styrofoam base and rest on protected

surface. Move and install unit with the aid of an assistant. Save

packing and shipping box for future unit storage.

Accessory Kit includes

® Hardware bag(shipped inside • Foam gasket

window support brackets)

• Window support bracket (2) • Window sash seal

• Side retainer (2) • Bottom rail seal

• Window Filler Panel (2) _= Top angle rail

MEDIUM models only

HEAVY DUTY top angle rail can be found in carton base

packaging (FIG.3)

Tools Required

® a large flat blade screwdriver • tape measure

® adjustable wrench or pliers • pencil

® level • Socket wrenches

• Phillips screwdriver

Avoid fire hazard or electric

shock. Do not use an extension cord or an

adaptor plug. Do not remove any prong

from the power cord.

- Groondio0 Prong

,_\_< ,__ Do not, under any

t_jI 23ov_ circumstances,cut,

_i i 30A/ remove or bypass the

\/'Io J-jH grounding prong.

HEAVY DUTY

(22,000~28,500BTU) FIG.3

TOP ANGLE RAIL

Hardware ( in plastic bag)

___ 7/16" Locking Screw and Flat 2 ea _'_

Washer for window filler panels

(_ 1/2" Long hex head screw 7

Safety Lock I

_ 1/2" Long Screw 4 ea

and Iocknut

4_ 3/4" Long Flat Head Bolt 2 ea

and Locknut

Hardware ( in plastic bag)

Sill Angle Bracket

Long hex-head locking screw for top

angle rail, side retainer 5/16" long

Safety Lock

(for Vinyl-Clad window)

Locking screw #10 X 1/4" panhead

Phillips screws (for Vinyl-Clad window)

weather seals

(6"x3/4"Xl/12")

_=_ foam insert 2