Installation guide

Keepafirmgripontheairconditioner,carefullyplacetheunitintothewindowopeningsothebottomoftheair
conditionerframeisagainstthewindowsill(FIG.6A&FIG.6B).Carefullyclosethewindowbehindthetoprail
oftheunit.
__FIG. 6A
INsIDL1E _--7 OUTSIDE
Wooden Windows
INSIDE I
Vinyl-Clad Windows
Extend the side panels out against the window frame (FIG. 7Afor wooden windows), (FIG. 7B for Vinyl-Clad
windows).
FIG. 7A FIG. 7B
window
frame
Place the frame lock between the frame extensions and the window sill as shown (FIG. 8Afor wooden
windows), (FIG. 8B for Vinyl-Clad windows).
FIG. 8A FIG. 8B
wooden windows: Vinyl-Clad windows:
Drive locking screws:
A: For wooden windows:
Drive 112" (12.7 mm) locking screws through the frame lock and into the sill (FIG. 9A). NOTE:To prevent
window sill from splitting, drill 118" (3mm) pilot holes before driving screws. Drive 1/2" (12.7 ram) locking
screws through frame holes into window sash (FIG. 9B).
B: For Vinyl-Clad windows:
Drive 112" (12.7 mm) locking screws through the frame lock and into the window sash (FIG. 9B). NOTE:
Before driving the screws, use a drill to drill 5 holes through the holes in the frame lock and frame extensions
into the windows sash as shown ( FIG. 9B).
FIG. 9B