Use & Care Guide

CARE AND CLEANING

Replacing the oven light

The interior oven lights are located at the rear of the oven

cavity and are covered with a glass shield. The glass shield

must be in place whenever the oven is in use (See

Figure 11).

Replacing the oven interior light bulb:

1. Turn electrical power off at the main source or unplug

the appliance.

2. Remove interior oven light shield by turning a quarter

turn counter-clockwise.

3. Replace bulb with a new T-4 type Halogen 25 watt

appliance bulb.

4. Replace glass oven light shield by rotating clockwise.

5. Turn power back on again at the main source (or plug

the appliance back in).

6. Be sure to reset the time of day on the clock

Be sure the oven is unplugged and all parts are cool

before replacing oven light.

Do not allow your fingers to touch the new bulb when

replacing. This will shorten the life of the bulb. Use a

paper towel or cotton glove while handling the new bulb

when installing.

Figure 11: Wall oven Halogen light

CAUTION

NOTE