Manual

Replacing the oven light
Be sure the oven is unplugged and all parts are cool
before replacing oven light. If the oven is hard wired into a
junction box, make sure the breaker that powers the oven
is turned off.
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure 10).
Replacing the oven interior light bulb:
1. Turn electrical power off at the main source.
2. Remove interior oven light shield by turning a quarter
turn.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing. :::
4. Replace glass oven light shield.
5. Turn power back on again at the main source.
6. Be sure to reset the time of day on the clock.
Figure 10: Wall oven Halogen light