Installation guide

OverheadCabinetShouldNotExceedaMaximum
Depthof13"(33cm)
orMetal
24"(61cm)Minwhen
BottomofWoodorMetal
Cabinet is Protected by Not
Less Than I/8" Flame
Retardant Millboard Covered
With Not Less Than No, 28
MGS Sheet Steel, 0.015"
(0.4 mm) Stainless Steel,
0,024" (0.6 ram) Aluminum
or 0,020" (0,5 ram) Copper
2 1/2" (6,4 cm) Min,
From Edge of Cutout
to Front Edge of
Countertop
18"
(45.7 cm)
rj Min.
Recommended
Distance Between
Rear Edge of Cutout
10"
( 25.4 cm)
Above Countertop
D
H Min, From Edge of
Cooktop to Nearest
Combustible Wall (Either Side
of Unit),
Approximate Location
of Junction Box
* Letters on this figure refer to chart on front
page except for Go H and J,
To eliminate the
risk of burns or fire by reaching
over heated surfaces, cabinet
storage space located above the
cooktop should be avoided. If
cabinet storage is provided, risk
can be reduced by installing a
range hood that projects
horizontally a minimum of 5"
(12.7 cm) beyond the bottom of
tile cabinets.
12"
(30, 5 cm)
Drawers cannot be used with
this cooktop since burner box
extends G below surface of
countertop,
MODEL ' G ' H ' J
2B" Coil Elements 31/2'' (8,g cm) 3" (7,6 cm) 2" (5,1 cm)
30" Ceramic%lass 4" (102 cm) 7½" (19,1 cm) 2" (5,1 cm)
30" Coil Elements B" (152 cm) 7h" (19,1 cm) 2¼" (5,7 cm)
32" Ceramic-Glass 4" (102 cm) 7h" (19,1 cm) 2" (5,1 cm)
32" Coil Elements B" (15,2 cm) 7½" (19,1 cm) 2¼" (5,7 cm)
3B" Ceramic-Glass 4" (102 cm) 7h" (19,1 cm) 2" (5,1 cm)
3B" Coil Elements B" (152 cm) 3" (7,6 cm) 3" (7,B cm)
(3B" X 18")
36" Coil Elements B" (15,2 cm) 7h" (19,1 cm) 2¼" (5,7 cm)
(36" X 21h")
i
Figure 2 - COUNTERTOP CUTOUT OPENING