Manual

6. The TIMER function enables you to either start or stop the unit in the choice of
2 or 4 hours.If the unit is running then selecting TIMER at 2 hours will turn the unit
off after 2 hours.If the unit is off pressing the TIMER button and selecting say 4 hours,
the unit will turn on after 4 hours and remain working in the selected mode.The
POWER indicator must be lit to make sure power is being supplied to the unit.
7. To shut the unit down, press the ON/OFF button. Note: the power indicator will
still be lit when the unit is turned off. Only removing the plug will extinguish these
lights.
FAULT CODES
If the display reads "FI" or "F2", a sensor has failed. Contact your Authorized
Frigidaire Service Center.