Manual

3. After a few days when the Relative Humidity has declined, press the HUMIDITY
/_oorV buttons to choose a value between 35% to 80%, so the room is kept at a
comfortable concentration.Pressing the _, or V buttons will change the humidity selection
in 5% increments.If at any time you want to return to the CONTINUOUS Mode,
pressing the HUMIDITY V button will lower the Relative Humidity through the 5%
increments until the Continuous indicator is lit and the display reads CO.
4. You can also use the FAN SPEED button to change the fan speed to HIGH or LOW.
The indicator light will show the setting you have selected. A higher fan
speed will result in quicker moisture removal.
5. The FILTER RESET light will illuminate after 250 hours of operation. At this time
refer to the Care and Cleaning section to remove and clean the filter. Once the filter
has been cleaned, to extinguish the light simply press the FILTER button.