Manual

OPERATION & FEATURES
Allow the unit to reach room temperature before operating.
To begin operating the dehumidifier, follow these steps:
1. Plug the power cord into a properly grounded 110/120 volt AC outlet. Note the
POWER indicators will illuminate.
2. To turn the unit on press the ON/OFF button. The unit will run in the factory
setting of CONTINUOUS and high fan speed.After a few seconds the unit will
display the actual room's relative humidity. This will be the case after each
and every change of setting.It is recommended you leave the unit running in
the CONTINUOUS setting for the first three or four days until the sweating
and dampness odors have stopped.