Installation guide

iNSTALLATiON iNSTRUCTiONS

Excessive Weight Hazard

Use two or more people to move and install

air conditioner,

Failure to do so can result in back or other injury.

4. Pull on the handles to slide the air conditioner out of the

cabinet. Place the air conditioner on cardboard.

Remove packaging materials

[] Remove and dispose of/recycle packaging materials,

Remove tape and glue residue from surfaces before turning

on the air conditioner, Rub a small amount of liquid dish soap

over the adhesive with your fingers, Wipe with warm water

and dry.

[] Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your air conditioner.

[] Handle the air conditioner gently.

1. Remove the air conditionerfrom the carton and place iton

cardboard,

A, Handle

NOTE: Do not lilt, push, pull or remove any expanded

polystyrene (foam)from inside the air conditioner. It is not

packing material.

2. Remove 1 shipping screw from each side of the cabinet.

A. Shipping screw

3. Remove front panel by removing 1 phillips screw from each

side of the front panel, Set screws aside and save.

°°°°6 A

A.front panel screw