Manual

Using Air Conditioner To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETYINSTRUCTIONSbefore operating this appliance.
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Set the exhaust vent to the CLOSEDposition.
3. Adjust the louvers for comfortabb air flow.
Review the "Air Conditioner Features" section for other settings.
Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions, then follow the symbol for the functions you
desire. The unit can be controlled by the touch pad alone or with the remote.
LOWERS DISPLAYS
TEMPERATURE TEMPErATURE/TIME
OR TiME
TURNSUNIT
ON OR OFF
RAISES
SETS
SETS MODE
REMOTECONTROL
Slip battery cover off and pull the piece of plastic from between
the battery end and the connector. For some applications the
batteries supplied will first need to be installed.
PIECE
STEP 1 -- TO TURN UNIT ON: YOU WILL SEE:
DO THIS: J
PRESSON/OFF
PAD
Note: Remember that in this mode, the fan will run continuously while the
compressor cycles on and off as needed to maintain the room temperature. (See
also, power saver mode, step 6)