Manual

Air Conditioner Features
(continued)
FAULT CODES
If the display reads"HS", a sensor has failed.
Contact your Authorized Frigidaire Service
Center,
+
If the display reads"AS", a sensor has failed.
Contact your Authorized Frigidaire Service
Center.
If the display reads"ES", a sensor has failed.
Contact your Authorized Frigidaire Service
Center.
ADDITIONAL THINGS YOU SHOULD KNOW
Now thot you hove mostared the operating procedure,here ore more features in your control that you should become familiar with:
• The '_oor' circuithasan automatic3 minute timedelayedstartifthe unitisturnedoffand on
_ quickly.This preventsoverheating ofthe compressorand possible circuitbreaker tripping.The /_\
fan willcontinuetorunduringthis times.
° The control will maintain the set temperature within 2 degrees Fahrenheit, betwean 60F and 90F degrees.
= The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.To convert from one to the other and back,
Press and hold the"TEMP/TIMER"Up ( A ) and Down ( V ) buttons together for 3 seconds.
Fresh Air Vent Control(On some models)
The Fresh Air Vent allows the air conditioner to:
1, Recirculata inside air - Vent Closed (see Fig, 1)
2, Draw fresh air into the room - Vent Open (see Fig, 2)
3, Exchange air from the room ond draws fresh oir intothe room - Vent ond Exhoust
Open (see Fig, 3)
Fig. 1 (OFF)
Fig. 2 (FRESH AIR)
Fig. 3 (VENT)
(4-WAY)
The louvers will allow you to direct the oir T'lowUp or Down and Left or Right throughout
the room as neaded.Rotata the Auger Wheel Up or Down until the desired direction is
obtained.
AUGER WHEEL
10