Manual

Air Conditioner Features

(continued)

TO ADJUST FAN SPEEDS:

DO THIS:

PRESS TO

SELECT:

FASTER

YOU WiLL SEE (10-99):

Temp/_mer

,e,_t_ Steep Check

Terns* S,ower Fa_ _ F_l_

Enemy Sav_r

A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the "SLOWER" button is pressed the motor speed

will slow down at various intervals, down to a minimum setting of 10. To speed the motor up, press the "FASTER" button. The speed will incr-

ease at multiple intervals to a maximum setting of 99. Display will revert back to temperature setting after a short time.

TO USE AUTO TEMP FEATURE:

Temt>/_m_r

%;_,"_V DO THIS:

....................-................}____z2%.Wo

_.e. _ BUTTON

LIGHT ON

YOU WiLL SEE:

Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn't

get too warm, it wilI stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go

to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.

TO OPERATE ON FAN ONLY:

YOU WiLL SEE:

DO THIS:

PRESS

MODE BUTTON

CHOOSE

FAN ONLY

LIGHT ON

Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember to open the

vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Exc-

ept "Auto Temp").

During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.

SZO00728(En)-Yaokong 6 09/20/2005, 0:30 PM