Installation guide

4. CHECK FOR ANYTHING THAT COULD BLOCK
AIRFLOW- check area outside of window for things
such as shrubs, lrees, or awnings. Inside, be sure
furniture, drapes, or blinds will not stop proper air flow.
S. Check the availaMe electrical service - lmwer supply mtt_t
be the same as that shown on the unit serial nameplate.
(See Owner's Guide for serial plate location.)Power cord
is 48"long. Be sure you have an outlet near.
Tools Required
a large flat blade screwdriver
tape measure
adjustable wrench or pliers
pencil
Level
Socket wrenches
Phillips screwdriver
All models have a 3-prong service plug to provide proper
service and safe positive grouding. Do not change plug in
any way. Do not use an adapter plug. If your present wall
outlet does not match yore plug, call a qualified eleclriciml
lo make the needed change.
Avoid firehazed o1"electric
shoclcDo not usean extensioncolvlo1"an
adaptorplug.Do notremoveanyp!ongfrom
thepower cord.
Crounding _rpe _all
receptacle
plug anti current
detection device
6. Carefully unpack air conditioner - remove all packing
material Protect floor or caq)et fi'om damage. Two
people should be used to move and install unit.
Hardware (in plastic bag)
Washer Head
Locking Scre,s
For '_indow panels
3/4" Long ttex-Head Screv\
Safety Lock
(_ 1:2" Long Scre,,
and tocknut
_)Q 3:'4" Long Flal
ttead Bolt and
Locknut
Sill Angle Bracket
_ Long hex-head
locking screw for
top angle, side
retainer 5/!6"
Long
Qly.
2
4ca.
2 ca.
2
10