Manual

Operating Instructions

(continued)

CHECK FILTER FEATURE:

LIGHT ON

LIGHT OFF

YOU WILL SEE:

o < (>

DO THIS:

PRESSCHECK

FILTER

BUTTON

Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will

illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Check Filter" button and the light will go off.

CLEAN AIR FEATURE(on some models):

YOU WILL SEE:

LIGHT ON

DO THIS:

PRESS

CLEAN AIR

BUTTON

Note: When this feature is "ON", the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this

feature, press the Clean Air button (the LIGHT will turn off).

Note: This feature can be activated on the unit touch pad ONLY.

SLEEP FEATURE: YOU WILL SEE:

LIGHT ON

DO THIS:

PRESS

SLEEPBUTTON

Note: In this mode the selected temperature will increase by 2 °F 30 minutes after the mode is selected. The temperature will then

increase by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to

the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed.

The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep" button.