Manual

Air Conditioner Features
(continued)
SLEEP FEATURE:
DO THIS:
PRESSSLEEP
PAD
YOU WiLL SEE:
The Sleep Mode can be selected with a Heating or Cooling Mode, Note: In this "MODE" the selected cooling temperature will
increase by 2 degrees F,._0 minutes after the mode is selected, ]he temperature will then increase by another 2 degrees F,after
an additional ._0 minutes, This new temperature will be maintained for 7 hours before it returns to the originally selected
temperature, If this Mode is selected with Heal the set temperature will Decrease at the same time pattern, This ends the
"Sleep" MODE and the unit will continue to operate as originally programmed, The "Sleep" MODE program can be cancelled
at any time during operation by pressing "Sleep" MODE button,
CLEAN FILTER FEATURE:
DO THIS:
PRESSTO RESET
YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling, The
LED (light) will illuminate after 250 hours of operation, To reset after cleaning the filter, press the "Clean Filter" button and the
light will go off,
HEATING FEATURE (on somemodels):
DO THIS:
PRESS
-MODE BUTTON
SELECTHEAl
YOU WILL SEE:
Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes, When in the "Heat" Mode_
the fan will run continuously while heat is needed, The temperature will automatically be maintained anywhere between
55"F (].T'C) and 80_'F(27_'C),When the room set temperature is satisfied, the fan will cycle off and or] to circulate and sample
the room air,