Manual

lll

Operating Instructions

(continued)

6. The TIMER function enables you to either Delay Start or Delay Stop the unit in the choice from 0.5 hour to 24 hours.

If the unit is running, then selecting Timer will turn the unit off in the hours that will be set (Delay Stop). If the unit is

off, then selecting Timer will turn the unit on in the hours that will be set (Delay Start).

TIMER setting: First press TIMER button, then adjust timer setting, by tapping or holding the A or V button to

change the delay timer at 0.5 hour increments, up to 10 hours, then by 1 hour increments up to 24 hours. The

control will count down the time remaining (8,7.5,7, etc.) until the unit either starts or stops. For the Delay Start, the

fan speed and humidity maintained will be the same as previous setting. After TIMER setting finishes, pressing TIMER

button again at any time will stop the TIMER function. The Delay Start/Stop Feature will work until the unit either

starts or stops. Once that happens the above steps have to be repeated.

1. Before entering TIMER setting, make sure power is being supplied to the unit.

2. Before entering TIMER setting, make sure pressing HUMIDITY A or V button sets one desired room humidity first.

humidi_ setdng

RH%

fitter fan V A timer ON-OFF

reset speed L humidityJ

7. To shut the unit down, press the ON/OFF button.

fitter

reset

humidity setting

RH%

fan V A timer ON-OFF

speed C humidity J

Fault Codes

1. If the display reads "AS" or "ES", a sensor has failed. Contact your Authorized Frigidaire Service Center.

fitter fan V A timer ON-OFF

reset speed C humidityJ

v__ j